A hose assembly that fits a stationary drawing may rub, kink or pull on its fittings as the cylinder moves. Routing must be checked in the retracted, intermediate and extended positions and through the machine’s full articulation.
Size the assembly as a moving component
Select hose inside diameter from peak flow and acceptable pressure loss, then verify the working pressure, fluid and temperature rating of the complete hose-and-fitting assembly. Parker’s hydraulic hose guidance calls out bend radius, pressure surges and possible length change under pressure. The minimum bend radius belongs to the selected hose size and construction; it should not be guessed from how easily a hose feels when bent by hand.
Технические проверки
- Draw the hose path at every extreme machine position.
- Keep bends away from the coupling and within the rated minimum radius.
- Allow movement without snagging, rubbing or twisting the assembly.
- Protect exposed sections from abrasion, hot surfaces and falling objects.
- Check fitting access and the effect of pressure pulses on restraint.
Распространенная ошибка, которую следует избегать
Using a larger hose without rechecking bend radius and support space can make routing worse. A hose that contacts a sharp bracket may fail early even when its pressure rating is adequate.
Данные, которые необходимо предоставить вместе с запросом
- Cylinder port standard and orientation.
- Peak flow, pressure, fluid and temperature.
- Movement envelope and route drawing.
- Required guards, clamps and inspection access.
Validate the final routing on the assembled machine with slow, controlled motion before normal operation. For related selection guidance, see our cylinder port sizing guide.
Технические ссылки: Parker hydraulic hose installation guidance; Parker hose technical handbook. Обложка: оригинальная концептуальная схема, а не фотография продукта.