Tie-rod and welded cylinders both convert hydraulic pressure into linear motion, but they package the barrel and end connections differently. The right choice comes from the machine envelope, loads, mounting and maintenance strategy; neither construction is automatically superior for every duty.
Compare the complete assembly, not a label
A tie-rod design clamps the end caps to the tube with external rods. Many industrial families offer standardized dimensions and service procedures. A welded-body design joins the barrel and ends differently and can be attractive where the available envelope or mounting geometry is constrained. Published pressure and fatigue ratings belong to a particular series, bore and mount; they cannot be transferred from one construction family to another. Compare cylinder drawings at the same required force, stroke and speed.
工程检查
- Check closed length, body diameter and service clearance inside the machine.
- Compare available mounting and rod-end styles with the actual load path.
- Review pressure rating at the chosen bore, rod and mount, including shock duty.
- Ask how the piston, gland, seals and bearings are accessed for repair.
- Check weight, corrosion exposure, port position and hose access.
应避免的常见错误
Choosing a “heavy-duty welded cylinder” or a “standard tie-rod cylinder” from its headline rating alone can miss mount limitations, rod buckling or an inaccessible service location. The entire assembled drawing and its series-specific ratings matter.
随询价一并发送的数据
- Machine general arrangement and required stroke.
- Push/pull load versus position and pressure transients.
- Mounting interfaces, space limits and service access.
- Operating environment, fluid and test documentation.
Request two comparable approved drawings if both architectures are viable, then evaluate installed cost and maintainability over the expected life. For related selection guidance, see our hydraulic cylinder mounting guide.
技术参考： Parker cylinder solutions catalog; Parker hydraulic cylinder specification guide. 封面：原始概念示意图，并非产品照片。.