Radial Floodgate Hydraulic Cylinder

Radial Floodgate Hydraulic Cylinder

Radial floodgates place their operating cylinders within a structural system of trunnions, arms, seals and civil works. Yongjian can review the gate layout for a custom actuator or replacement, with dimensions and performance established from the approved project documents. A gate’s required force changes with water level, seal friction and operating position.

AI-assisted illustrative image based on hydraulic component references. It is not a photograph of a delivered product. Final appearance, dimensions and performance depend on the approved project drawing.

Application and load review

Provide the gate radius, arm and trunnion geometry, cylinder attachment points, gate travel, water levels, opening and closing forces, and emergency conditions. Check pin reactions and cylinder alignment across the full path. Where paired cylinders are used, specify the synchronization approach and allowable skew at system level. The designer should define safe holding and movement during power or control loss.

Configuration and integration

The cylinder specification should settle stroke, closed length, rod and bore, mount pins, port arrangement, position indication and end-of-travel approach. Discuss moisture, ultraviolet exposure, flooding, debris and water-compatible maintenance practices when selecting seals, rod treatment and paint. Access for pin withdrawal, gland service and hose replacement should be shown in the installation drawing.

Inspection and acceptance

Identify critical dimensions, pressure and leakage tests, stroke verification, surface protection, identification and preservation before manufacture. Functional gate commissioning, synchronization and safety interlocks must be checked in the installed hydraulic system.

Information for a quotation

Send gate general arrangement, water load cases, movement time, stroke and mount drawings, pressure, fluid, environmental conditions, sensor interfaces, quantity and test documentation needs. Send drawings and project details to Yongjian for an engineering review and quotation.